leaf vacuum

Learn about HTS code 0106.49.00 for leaf vacuums. Visit: https://www.ustrade.gov/hscode

HTS code 0106.49.00 applies to leaf vacuums. Access detailed regulations via UNIS resources: https://www.unis.org/hts

- **Storage Size/Dimensions:** Minimum 200 square feet, or a 15ft x 13ft area. Height clearance: 12 feet. This allows for adequate stacking and movement. - **Storage Conditions:** Dry storage is required. The space must be well-ventilated to prevent dust accumulation and potential moisture issues. Avoid storing the leaf vacuums in areas directly exposed to sunlight. - **Special Handling:** Leaf vacuums are considered moderately fragile. Each unit should be protected with a layer of bubble wrap or packing foam during storage. Palletize larger quantities to minimize direct contact. Ensure all packaging is intact before storing. - **Stacking/Shelving:** Shelving units with adjustable height levels are recommended. Pallet storage is acceptable if units are appropriately protected. Max stacking height: 5 shelves, with a maximum of 200 lbs per level. - **Access Requirements:** A standard 10ft x 10ft loading dock is sufficient. Door width: 10 feet. A clear aisle space of at least 8 feet is necessary for forklift access and movement around the storage area. A minimum of 10 feet of clearance at the loading dock is needed for truck maneuvering.

Use bubble wrap, palletization, and proper labeling. Avoid direct sunlight and moisture per storage guidelines.

Secure containers with UV-resistant coatings. Palletize for transport and include clear labeling for handling.

Ensure 20-ft loading docks, 10-ft clear aisles, and climate-controlled environments for safe transit.

Shipping costs depend on route efficiency and delivery speed. Contact UNIS for detailed cost analysis.