kreg screw

For detailed HTS code 7318.13.00 information, visit the official customs authority site.

UNIS supports HTS code 7318.13.00 for Kreg Screws, ensuring compliance with international shipping regulations.

* **Storage Size/Dimensions:** Minimum 75 square feet, or a 10ft x 7.5ft area. Height clearance: 8 feet. This allows for approximately 500 boxes of Kreg screws (assuming standard box sizes). * **Storage Conditions:** The storage area should be dry and well-ventilated. Avoid direct sunlight exposure. The floor should be level and clean to prevent damage to the screws. Maintain a dust-free environment. * **Special Handling:** Kreg screws are considered fragile. Each box should be padded with bubble wrap or foam to prevent damage during handling and stacking. Boxes should be handled with care to avoid dropping or crushing. * **Stacking/Shelving:** Boxes can be stacked up to 48 inches high. Shelving units with adjustable shelves are recommended. Pallet storage is acceptable, but ensure pallets are sturdy and in good condition. Consider using shelving with a minimum of 12 inches of clearance between shelves. * **Access Requirements:** A standard 10ft wide loading dock is required for truck access. The door should be at least 8 feet wide for easy access. A clearance of 10 feet on either side of the loading dock is needed for truck maneuverability. Ensure adequate aisle space for forklift access – a minimum of 12 feet.

Handle with care; use bubble wrap and secure packaging. Stack up to 48 inches to avoid compression risks.

Boxes must include padding. Pallets should be used with 2-inch clearance for shelving.

Require a 10ft x 7.5ft loading dock, 10ft door, and 15ft aisle space for efficient handling.

Storage size, handling complexity, and environmental controls directly impact shipping costs.