water soften system

For details on HTS classification and shipping requirements, visit the official HTS website.

Access UNIS HTS Codes for detailed classification and shipping requirements.

* **Storage Size/Dimensions:** Minimum 150 square feet or a 10ft x 15ft area. Height clearance: 8 feet is required for stacking. * **Storage Conditions:** The storage area should be dry and well-ventilated. The floor should be level and clean to prevent damage. Avoid direct sunlight exposure. * **Special Handling:** Components, particularly resin drums and filters, are considered fragile. Utilize protective padding (cardboard, foam) during movement and storage. Ensure adequate support to prevent damage from stacking. Utilize hand trucks or pallet jacks for moving heavier items. * **Stacking/Shelving:** Items can be stored on pallets, with a maximum pallet height of 48 inches. Shelving units with adjustable shelves are recommended to maximize vertical space. Stacking should be done with a load capacity of at least 500 lbs per shelf. * **Access Requirements:** A standard loading dock with a 12ft wide bay and a 10ft door width is necessary. A minimum clearance of 10 feet on either side of the loading dock is required for truck maneuvering. Forklift access is essential for efficient movement within the storage area. A clear aisle space of 8 feet is needed between storage locations.

Secure access and protection from elements are essential. Proper labeling and tracking protocols ensure accurate stock levels and quick order fulfillment.

Use protective padding (cardboard, foam) during movement. Stack items on pallets with a maximum height of 48 inches and use adjustable shelving for vertical space.

A standard loading dock with a 12ft wide bay and 10ft door width is necessary. Ensure 10ft clearance on either side for truck maneuvering.

Forklift access is essential for efficient movement. Maintain an 8ft clear aisle between storage locations.