Rate Notice: 5.9% general rate increase Jan 1, 2026 — Learn More

    2602.00.00

    Manganese ores and concentrates, including ferruginous manganese ores and concentrates with a manganese content of 20 percent or more, calculated on the dry weight

    This code covers manganese ores and concentrates, including ferruginous varieties with at least 20% manganese content when measured dry. Use this code when importing these materials, as the duty is currently free for standard trade partners, aligning with Chapter 26’s focus on ores, slag, and ash.

    Manganese ores and concentrates, including ferruginous manganese ores and concentrates with a manganese content of 20 percent or more, calculated on the dry weight

    Detailed information for HTS Code 2602.00.00

    This section of the Harmonized Tariff Schedule covers manganese ores and concentrates, including those containing iron, with a manganese content of 20 percent or more measured on a dry weight basis. The code 2602.00.00 specifically addresses these materials, and further breaks down into subdivisions based on manganese content—either less than 47 percent (2602.00.00.40) or 47 percent or more (2602.00.00.60). When reporting, quantity should be in kilograms and manganese content in Mn kg, and statistical suffixes are used to specify the metal content within the shipment, requiring multiple entries if a product contains more than one named metal. Ensure reported weights and values are accurate and reflect the dry-weight basis for percentage calculations.

    ChapterChapter 26 - Ores, slag and ash
    SectionSection V - Mineral Products

    Duty snapshot

    Quick reference for the duty outcomes tied to this HTS line.

    General Duty

    Free

    Standard trade partners (NTR)

    Special Duty

    N/A

    Eligible FTA or preference programs

    The general duty rate for HTS code 2602.00.00 and its subdivisions (2602.00.00.40 & 2602.00.00.60) is free, applying to standard trade partners (NTR). Special rates are not specified, but eligibility for FTA or preference programs could offer reduced or eliminated duties. Reporting is required in both kilograms (kg) and manganese kilograms (Mn kg), signifying that duty assessment or statistical tracking may be based on manganese content alongside total weight. This means both weight and manganese content must be reported for accurate classification and potential application of preferential trade agreements.

    Rate of Duty (Column 2): 2.2¢/kg on manganese content

    Need help importing?
    _

    Submit your details, and our team will confirm the correct classification and answer your questions.

    Code subdivisions

    2602.00.00.40

    Manganese ores and concentrates, including ferruginous manganese ores and concentrates with a manganese content of 20 percent or more, calculated on the dry weight > Containing less than 47 percent by weight of manganese

    2602.00.00.60

    Manganese ores and concentrates, including ferruginous manganese ores and concentrates with a manganese content of 20 percent or more, calculated on the dry weight > Containing 47 percent or more by weight of manganese

    Chapter & section notes

    Chapter notes

    Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes CHAPTER 26 ORES, SLAG AND ASH V 26-1 Notes 1. This chapter does not cover: (a) Slag or similar industrial waste prepared as macadam (heading 2517); (b) Natural magnesium carbonate (magnesite), whether or not calcined (heading 2519); (c) Sludges from the storage tanks of petroleum oils, consisting mainly of such oils (heading 2710); (d) Basic slag of chapter 31; (e) Slag wool, rock wool or similar mineral wools (heading 6806); (f) Waste or scrap of precious metal or of metal clad with precious metal; other waste or scrap containing precious metal or precious metal compounds, of a kind used principally for the recovery of precious metal (heading 7112 or 8549); or (g) Copper, nickel or cobalt mattes produced by any process of smelting (section XV). 2. For the purposes of headings 2601 to 2617, the term "ores" means minerals of mineralogical species actually used in the metallurgical industry for the extraction of mercury, of the metals of heading 2844 or of the metals of section XIV or XV, even if they are intended for non-metallurgical purposes. Headings 2601 to 2617 do not, however, include minerals which have been submitted to processes not normal to the metallurgical industry. 3. Heading 2620 applies only to: (a) Slag, ash and residues of a kind used in industry either for the extraction of metals or as a basis for the manufacture of chemical compounds of metals, excluding ash and residues from the incineration of municipal waste (heading 2621); and (b) Slag, ash and residues containing arsenic, whether or not containing metals, of a kind used either for the extraction of arsenic or metals or for the manufacture of their chemical compounds. Subheading Notes 1. For the purposes of subheading 2620.21.00, "leaded gasoline sludges and leaded anti-knock compound sludges" means sludges obtained from storage tanks of leaded gasoline and leaded anti-knock compounds (for example, tetraethyl lead), and consisting essentially of lead, lead compounds and iron oxide. 2. Slag, ash and residues containing arsenic, mercury, thallium or their mixtures, of a kind used for the extraction of arsenic or those metals or for the manufacture of their chemical compounds, are to be classified in subheading 2620.60. Additional U.S. Notes 1. The specific rates of duty imposed under the headings of this chapter on the metal content of ores and other materials shall apply to the assay quantity of metal contained therein, whether recovered as metals, as alloys or as chemical compounds or used directly in the manufacture of articles, except that with respect to ores or other materials provided for in this chapter which are subject to duty at specific rates on their copper, lead or zinc content, an absolute deduction for losses of 18 kg per dry metric ton from the respective quantities of each of such metal contents shall be allowed. 2. When the classification of imported materials under any provision of this chapter is dependent on the percentage of metal content, such percentage shall be the ratio of the total quantity of the respective metal content to the total quantity of imported material when computed on a dry-weight basis; i.e., free of all uncombined moisture. Statistical Notes 1. The quantity of metal content to be reported shall be the assay quantity without deductions. 2. For the purposes of subheading 2601.11.0060, the term "coarse" refers to iron ores with a majority of individual particles having a diameter exceeding 4.75 mm. Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes V 26-2 Statistical Notes (con.) 3. For the purposes of any of the ten-digit statistical reporting numbers appearing under the eight-digit subheadings 2603.00.00, 2604.00.00, 2607.00.00, 2608.00.00, 2616.10.00, 2616.90.00, 2620.19.60, 2620.21.00, 2620.29.00 or 2620.30.00, and the ten-digit statistical reporting numbers 2620.99.7560 and 2620.99.7580 for the eight-digit subheading specifying that a named metal content is to be reported, the weight and value of such metal contained in any shipment of the ores, concentrates, slag, ash or residues entered under such subheading shall be reported under each applicable statistical reporting number. If a product covered by one of these provisions includes more than one of the named metals, it would be necessary to enter multiple ten-digit subheadings with the weight and value of each metal indicated under the appropriate ten-digit subheading. Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes V 26-3

    Section notes

    SECTION V MINERAL PRODUCTS V-1 Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes V-2 Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes

    Latest update

    Last updated

    November 15, 2025

    Revised every January & July

    Let's get your shipment cleared

    Submit your details and our team will help with classification and compliance.