Rate Notice: 5.9% general rate increase Jan 1, 2026 — Learn More

    2710.19.11

    Testing 25 degrees A.P.I. or more

    This code covers mineral fuels, oils, and products of their distillation, including bituminous substances and mineral waxes. Use this information to properly classify these goods for duty assessment and to understand their position within the Harmonized Tariff Schedule, paying close attention to the detailed product specifications and notes provided.

    Testing 25 degrees A.P.I. or more

    Detailed information for HTS Code 2710.19.11

    This information falls within the section of the Harmonized Tariff Schedule covering mineral fuels, mineral oils, and products of their distillation. The code 2710.19 specifically addresses petroleum oils and oils obtained from bituminous minerals, excluding crude oils; this code covers various fuel oil types differentiated by viscosity as measured by the Saybolt Universal Viscosity at 100°F. Subdivisions within 2710.19 further specify different fuel oil grades, like No. 4 fuel oils or heavy fuel oils, and may also be qualified by sulfur content, helping to classify the specific type of fuel oil being reported; statistical suffixes may be added to track trade details for specific countries or special programs.

    ChapterChapter 27 - Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes
    SectionSection V - Mineral Products

    Duty snapshot

    Quick reference for the duty outcomes tied to this HTS line.

    General Duty

    10.5¢/bbl

    Standard trade partners (NTR)

    Special Duty

    Free (A+,AU,BH,CL,CO,D, IL,JO, KR,MA,OM,P, PA,PE,R,S,SG)

    Eligible FTA or preference programs

    𒅈The general duty rate for heading 2710 (Mineral fuels, mineral oils and products of their distillation) is not specified, but various subdivisions have specific rates. These rates apply to products measured by quantity (liters or kilograms) or value (cost or insurance and freight). FTA rates, if applicable (based on country of origin and trade agreements), would offer reduced or zero duty compared to the general rate. The provided text details numerous subdivisions based on fuel type (e.g., No. 4 fuel oil, heavy fuel oil) and sulfur content, each potentially subject to a different rate depending on the applicable trade regulations and origin of the goods. Determining the precise duty requires identifying the correct subdivision based on product characteristics and country of origin, then applying the corresponding rate.

    Rate of Duty (Column 2): 21¢/bbl

    Need help importing?
    _

    Submit your details, and our team will confirm the correct classification and answer your questions.

    Code subdivisions

    2710.19.11.02

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Fuel oils Nos. 2 and 3: > Diesel oil: > Containing not more than 15 ppm of sulfur

    2710.19.11.03

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Fuel oils Nos. 2 and 3: > Diesel oil: > Containing more than 15 ppm but not more than 500 ppm of sulfur

    2710.19.11.04

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Fuel oils Nos. 2 and 3: > Diesel oil: > Containing more than 500 ppm of sulfur

    2710.19.11.05

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Fuel oils Nos. 2 and 3: > Other: > Containing not more than 15 ppm of sulfur

    2710.19.11.07

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Fuel oils Nos. 2 and 3: > Other: > Containing more than 15 ppm but not more than 500 ppm of sulfur

    2710.19.11.08

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Fuel oils Nos. 2 and 3: > Other: > Containing more than 500 ppm of sulfur

    2710.19.11.11

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Other: > Containing not more than 15 ppm of sulfur

    2710.19.11.13

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Other: > Containing more than 15 ppm but not more than 500 ppm of sulfur

    2710.19.11.14

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): > Other: > Containing more than 500 ppm of sulfur

    2710.19.11.15

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils): > Containing not more than 500 ppm of sulfur

    2710.19.11.25

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils): > Containing more than 500 ppm of sulfur

    2710.19.11.50

    Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils: > Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: > Other: > Distillate and residual fuel oils (including blended fuel oils): > Testing 25 degrees A.P.I. or more > Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils)

    View HTS reference

    Chapter & section notes

    Chapter notes

    Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes CHAPTER 27 MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES V 27-1 Notes 1. This chapter does not cover: (a) Separate chemically defined organic compounds, other than pure methane and propane which are to be classified in heading 2711; (b) Medicaments of heading 3003 or 3004; or (c) Mixed unsaturated hydrocarbons of heading 3301, 3302 or 3805. 2. References in heading 2710 to "petroleum oils and oils obtained from bituminous minerals" include not only petroleum oils and oils obtained from bituminous minerals, but also similar oils, as well as those consisting mainly of mixed unsaturated hydrocarbons, obtained by any process, provided that the weight of the nonaromatic constituents exceeds that of the aromatic constituents. However, the references do not include liquid synthetic polyolefins of which less than 60 percent by volume distills at 300˚C, after conversion to 1,013 millibars when a reduced-pressure distillation method is used (chapter 39). 3. For the purposes of heading 2710, "waste oils" means waste containing mainly petroleum oils and oils obtained from bituminous minerals (as described in note 2 to this chapter), whether or not mixed with water.These include: (a) Such oils no longer fit for use as primary products (for example, used lubricating oils, used hydraulic oils and used transformer oils); (b) Sludge oils from the storage tanks of petroleum oils, mainly containing such oils and a high concentration of additives (for example, chemicals) used in the manufacture of the primary products; and (c) Such oils in the form of emulsions in water or mixtures with water, such as those resulting from oil spills, storage tank washings, or from the use of cutting oils for machining operations. Subheading Notes 1. For the purposes of subheading 2701.11, "anthracite" means coal having a volatile matter limit (on a dry, mineral-matter-free basis) not exceeding 14 percent. 2. For the purposes of subheading 2701.12, "bituminous coal" means coal having a volatile matter limit (on a dry, mineral-matter-free basis) exceeding 14 percent and a calorific value limit (on a moist, mineral-matter-free basis) equal to or greater than 5,833 kcal/kg. 3. For the purposes of subheadings 2707.10, 2707.20, 2707.30, 2707.40, the terms "benzol (benzene)", "toluol (toluene)", "xylol (xylenes)" and "naphthalene" apply to products which contain more than 50 percent by weight of benzene, toluene, xylenes or naphthalene, respectively. 4. For the purposes of subheading 2710.12, "light oils and preparations" are those of which 90 percent or more by volume (including losses) distill at 210˚C according to the ISO 3405 method (equivalent to the ASTM D 86 method). 5. For the purposes of the subheadings of heading 2710, the term “biodiesel” means mono-alkyl esters of fatty acids of a kind used as a fuel, derived from animal, vegetable or microbial fats and oils whether or not used. Additional U.S. Notes 1. (a) Crude petroleum oils, crude oils obtained from bituminous minerals and reconstituted crude petroleum shall, if products of Canada, be admitted free of duty and any entry therefor shall be liquidated or reliquidated accordingly if, on or before the 180th day after the date of entry, documentation is filed with the customs officer concerned establishing that, pursuant to a commercial exchange agreement between the United States and Canadian refiners which has been approved by the Secretary of Energy-- (i) An import license for the products covered by such entry has been issued by the Secretary; and Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes V 27-2 Additional U.S. Notes (con.) (ii) An equivalent amount of domestic or duty-paid foreign crude petroleum oils, crude oils obtained from bituminous minerals or reconstituted crude petroleum have, pursuant to such commercial exchange agreement and to an export license issued by the Secretary of Commerce, been exported from the United States to Canada and have not previously been used to effect the duty-free entry of like Canadian products under this U.S. note. (b) The Secretary of the Treasury, after consulting with the Secretary of Commerce and the Secretary of Energy, shall issue such rules or regulations as may be necessary governing the admission of Canadian products pursuant to the provisions of this U.S. note. 2. For the purposes of heading 2710, "petroleum oils" includes only products having: (a) A Congealing Point (ASTM D 938) of less than 30˚C; (b) If the Congealing Point is not less than 30˚C: (i) A density at 70˚C of less than 0.942 and a Worked Cone Penetration (ASTM D 217) or a Cone Penetration or (ASTM D 937) at 25˚C of not less than 350; or (ii) If the density at 70˚C is not less than 0.942 having a Needle Penetration (ASTM D 5) at 25˚C of not less than 400. 3. For the purposes of subheading 2710.12.15, "motor fuel" is any product derived primarily from petroleum, shale or natural gas, whether or not containing additives, which is principally used as a fuel in internal-combustion or other engines. 4. For the purposes of subheadings 2710.12.18, 2710.19.25 and 2710.20.15, "motor fuel blending stock" means any product (except naphthas of subheading 2710.12.25) derived primarily from petroleum, shale oil or natural gas, whether or not containing additives, to be used for direct blending in the manufacture of motor fuel. 5. In determining the relative weights of components of the mixtures provided for in subheadings 2710.12.45 and 2710.19.45, naphtha and other petroleum derivatives which may be present in such mixtures as solvents shall be disregarded. 6. For the purposes of heading 2716: (a) The term "electrical energy" does not include electrical energy transmitted as a medium of communication; and (b) Electrical energy shall not be subject to the entry requirements for imported merchandise set forth in section 484 of the Tariff Act of 1930, as amended, (19 U.S.C. 1484), but shall be entered on a periodic basis in accordance with regulations to be prescribed by the Secretary of the Treasury. 7. For the purposes of this chapter, the term barrel (bbl) means a barrel of 158.98 liters measured at 15.6˚C. 8. Subheading 2712.10.00 does not include petroleum jelly, suitable for use for the care of the skin, put up in packings of a kind sold at retail for such use (subheading 3304.99.10). Statistical Note 1. For the purposes of statistical reporting number 2710.12.4560, the term “renewable fuels” means fuels produced from biogenic material according to the ISO 16620-2 method (equivalent to the ASTM D 6866 method). Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes V 27-3

    Section notes

    SECTION V MINERAL PRODUCTS V-1 Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes V-2 Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes

    Latest update

    Last updated

    November 15, 2025

    Revised every January & July

    Let's get your shipment cleared

    Submit your details and our team will help with classification and compliance.