Rate Notice: 5.9% general rate increase Jan 1, 2026 — Learn More

    7409.39.90

    Of a width of less than 500 mm

    This code covers copper plates, sheets, and strip of bronze alloys with a width less than 500mm and thickness exceeding 0.15mm. Use this code when importing these specific copper products, noting a general duty of 3% for standard trade partners, or potentially free duty if eligible for specific trade agreements.

    Of a width of less than 500 mm

    Detailed information for HTS Code 7409.39.90

    This code falls within Chapter 74, which covers copper and articles thereof, and specifically addresses copper plates, sheets, and strip exceeding 0.15mm in thickness. Code 7409.39.90 covers copper-tin base alloys (bronze) that are ‘other’ and less than 5mm thick, with a width of less than 500mm. There are two statistical subdivisions: 7409.39.90.30 for phosphor bronze and 7409.39.90.60 for all other compositions, so select the suffix that accurately reflects the alloy’s specific composition.

    ChapterChapter 74 - Copper and articles thereof
    SectionSection XV - Base Metals and Articles of Base Metal

    Duty snapshot

    Quick reference for the duty outcomes tied to this HTS line.

    General Duty

    3%

    Standard trade partners (NTR)

    Special Duty

    Free (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG)

    Eligible FTA or preference programs

    The general duty rate for HTS code 7409.39.90 and its subdivisions (7409.39.90.30 & 7409.39.90.60) is 3%, applying to goods not qualifying for preferential treatment. However, a 0% duty rate (Free) applies to imports originating from specific countries including Australia, Canada, and others listed (A,AU,BH,CL,CO,D,E,IL,JO,KR,MA,OM,P,PA,PE,S,SG) if they meet the requirements of eligible Free Trade Agreements or preference programs. Reporting units are in kilograms (kg) and Copper kilograms (Cu kg) for both the main code and its subdivisions.

    Rate of Duty (Column 2): 49%

    Need help importing?
    _

    Submit your details, and our team will confirm the correct classification and answer your questions.

    Code subdivisions

    7409.39.90.30

    Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: > Of copper-tin base alloys (bronze): > Other: > Of a thickness of less than 5 mm: > Of a width of less than 500 mm > Of phosphor bronze

    7409.39.90.60

    Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: > Of copper-tin base alloys (bronze): > Other: > Of a thickness of less than 5 mm: > Of a width of less than 500 mm > Other

    View HTS reference

    Chapter & section notes

    Chapter notes

    Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes CHAPTER 74 COPPER AND ARTICLES THEREOF XV 74-1 Note 1. In this chapter the following expressions have the meanings hereby assigned to them: (a) Refined copper Metal containing at least 99.85 percent by weight of copper; or Metal containing at least 97.5 percent by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table: TABLE - Other elements Element Limiting content percent by weight Ag Silver 0.25 As Arsenic 0.5 Cd Cadmium 1.3 Cr Chromium 1.4 Mg Magnesium 0.8 Pb Lead 1.5 S Sulfur 0.7 Sn Tin 0.8 Te Tellurium 0.8 Zn Zinc 1 Zr Zirconium 0.3 Other elements*, each 0.3 * Other elements are, for example, Al, Be, Co, Fe, Mn, Ni, Si. (b) Copper alloys Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that: (i) The content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or (ii) The total content by weight of such other elements exceeds 2.5 percent. (c) Master alloys Alloys containing with other elements more than 10 percent by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as deoxidants, desulfurizing agents or for similar uses in the metallurgy of nonferrous metals. However, copper phosphide (phosphor copper) containing more than 15 percent by weight of phosphorus falls in heading 2853. Subheading Note 1. In this chapter the following expressions have the meanings hereby assigned to them: Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes XV 74-2 Subheading Note (con.) (a) Copper-zinc base alloys (brasses) Alloys of copper and zinc, with or without other elements.When other elements are present: - zinc predominates by weight over each of such other elements; - any nickel content by weight is less than 5 percent (see copper-nickel-zinc alloys (nickel silvers)); and - any tin content by weight is less than 3 percent (see copper-tin alloys (bronzes)). (b) Copper-tin base alloys (bronzes) Alloys of copper and tin, with or without other elements.When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3 percent or more the zinc content by weight may exceed that of tin but must be less than 10 percent. (c) Copper-nickel-zinc base alloys (nickel silvers) Alloys of copper, nickel and zinc, with or without other elements.The nickel content is 5 percent or more by weight (see copper-zinc alloys (brasses)). (d) Copper-nickel base alloys Alloys of copper and nickel, with or without other elements but in any case containing by weight not more than 1 percent of zinc.When other elements are present, nickel predominates by weight over each of such other elements. Additional U.S. Note 1. The deduction provided for in additional U.S. note 1 to chapter 26 shall apply to cement copper and copper precipitates of subheading 7401.20. Statistical Note 1. For the purposes of this chapter, the term "beryllium copper master alloy" refers to master alloys which contain by weight at least 3 percent but not more than 10 percent beryllium. Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes XV 74-3

    Section notes

    SECTION XV BASE METALS AND ARTICLES OF BASE METAL XV-1 Notes 1. This section does not cover: (a) Prepared paints, inks or other products with a basis of metallic flakes or powder (headings 3207 to 3210, 3212, 3213 or 3215); (b) Ferrocerium or other pyrophoric alloys (heading 3606); (c) Headgear or parts thereof of heading 6506 or 6507; (d) Umbrella frames or other articles of heading 6603; (e) Goods of

    Latest update

    Last updated

    November 15, 2025

    Revised every January & July

    Let's get your shipment cleared

    Submit your details and our team will help with classification and compliance.