Rate Notice: 5.9% general rate increase Jan 1, 2026 — Learn More
    UNIS logo

    9817.00.90

    Other

    This code covers defective or damaged metal waste/scrap, or metal processed for recovery, excluding copper, lead, zinc, and tungsten. It’s used for importing these materials for remanufacturing or metal recovery, and these items generally enter the U.S. duty-free as detailed within Chapter 98.

    Other

    Detailed information for HTS Code 9817.00.90

    AI Summary

    Chapter 98 covers special classification provisions and encompasses a variety of articles with unique import/export statuses, including those returned after repair or alteration. Code 9817.00.90 specifically addresses unwrought metals, including scrap, that are defective, damaged, or intended for remanufacturing, and cannot be commercially used in their current condition. This code has further subdivisions detailing specific types of materials like pigs, ingots, billets, or relaying/rerolling rails, and the statistical suffix should reflect these specific types when reporting import data. Statistical reporting requires choosing a suffix that accurately describes the specific metal product being imported, following the provided guidelines for combining the 9817.00.90 code with the relevant rate-of-duty code.

    ChapterChapter 98 - Special classification provisions
    SectionSection XXII - Special Classification Provisions; Temporary Legislation; Temporary Modifications Proclaimed pursuan

    Duty snapshot

    Quick reference for the duty outcomes tied to this HTS line.

    General Duty

    Free

    Standard trade partners (NTR)

    Special Duty

    N/A

    Eligible FTA or preference programs

    The general duty rate for HTS code 9817.00.90 and all its subdivisions (9817.00.90.40, 9817.00.90.60, and 9817.00.90.80) is Free, applying to standard trade partners (NTR). Eligible FTA or preference programs may offer special rates, but these are not specified. The unit of quantity is not specified, meaning reporting requirements will depend on the specific item and any applicable regulations. This indicates that while there's no standard duty for most countries, preferential treatment could be available based on trade agreements.

    Rate of Duty (Column 2): Free

    Need help importing?
    _

    Submit your details, and our team will confirm the correct classification and answer your questions.

    Code subdivisions

    9817.00.90.40

    Unwrought metal including remelt scrap ingot (except copper, lead, zinc and tungsten) in the form of pigs, ingots or billets (a) which are defective or damaged, or have been produced from melted down metal waste and scrap for convenience in handling and transportation without sweetening, alloying, fluxing or deliberate purifying, and (b) which cannot be commercially used without re-manufacture; relaying or rerolling rails; and articles of metal (except articles of lead, of zinc or of tungsten, and not including metal-bearing materials provided for in section VI, chapter 26 or subheading 8549.11, 8549.12, 8549.13, 8549.14, 8549.19 and not including unwrought metal provided for in chapters 72-81) to be used in remanufacture by melting or to be processed by shredding, shearing, compacting or similar processing which renders them fit only for the recovery of the metal content: > Other > Pigs, ingots or billets

    9817.00.90.60

    Unwrought metal including remelt scrap ingot (except copper, lead, zinc and tungsten) in the form of pigs, ingots or billets (a) which are defective or damaged, or have been produced from melted down metal waste and scrap for convenience in handling and transportation without sweetening, alloying, fluxing or deliberate purifying, and (b) which cannot be commercially used without re-manufacture; relaying or rerolling rails; and articles of metal (except articles of lead, of zinc or of tungsten, and not including metal-bearing materials provided for in section VI, chapter 26 or subheading 8549.11, 8549.12, 8549.13, 8549.14, 8549.19 and not including unwrought metal provided for in chapters 72-81) to be used in remanufacture by melting or to be processed by shredding, shearing, compacting or similar processing which renders them fit only for the recovery of the metal content: > Other > Relaying or rerolling rails

    9817.00.90.80

    Unwrought metal including remelt scrap ingot (except copper, lead, zinc and tungsten) in the form of pigs, ingots or billets (a) which are defective or damaged, or have been produced from melted down metal waste and scrap for convenience in handling and transportation without sweetening, alloying, fluxing or deliberate purifying, and (b) which cannot be commercially used without re-manufacture; relaying or rerolling rails; and articles of metal (except articles of lead, of zinc or of tungsten, and not including metal-bearing materials provided for in section VI, chapter 26 or subheading 8549.11, 8549.12, 8549.13, 8549.14, 8549.19 and not including unwrought metal provided for in chapters 72-81) to be used in remanufacture by melting or to be processed by shredding, shearing, compacting or similar processing which renders them fit only for the recovery of the metal content: > Other > Other

    Chapter & section notes

    Chapter notes

    Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes CHAPTER 98 SPECIAL CLASSIFICATION PROVISIONS XXII 98-1 U.S. Notes 1. The provisions of this chapter are not subject to the rule of relative specificity in general rule of interpretation 3(a). Any article which is described in any provision in this chapter is classifiable in said provision if the conditions and requirements thereof and of any applicable regulations are met. 2. In the absence of a specific provision to the contrary, the tariff status of an article is not affected by the fact that it was previously imported into the customs territory of the United States and cleared through customs whether or not duty was paid upon such previous importation. 3. Any article exempted under subchapters IV through VII, inclusive, or subchapter IX from the payment of duty shall be exempt also from the payment of any internal-revenue tax imposed upon or by reason of importation. Statistical Notes 1. Statistical data are not to be furnished with respect to articles classified in those headings of this chapter for which no statistical suffix is shown. 2. For articles provided for in this chapter, the rate of duty for which is derived from a provision elsewhere in the tariff schedule, the citation to be used in statistical reporting shall be the 10-digit statistical reporting number provided in this chapter followed by the reporting number of the provision from which such rate is derived.The unit of quantity reported hereunder for such articles shall be the same as the unit of quantity for the provision from which the rate was derived. For example, 10 new fully automatic arc welding machines exported for repairs or alterations pursuant to a warranty and returned to the United States the statistical reporting number shall be 9802.00.4040-8515.31.0000, with the quantity being shown as 10 and the value as dutiable value. NOTICE TO EXPORTERS The statistical reporting numbers contained in this chapter apply only to imports and may not be reported on Shipper's Export Declarations. See Notice to Exporters preceding chapter 1. Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes SUBCHAPTER I ARTICLES EXPORTED AND RETURNED, NOT ADVANCED OR IMPROVED IN CONDITION; ANIMALS EXPORTED AND RETURNED XXII 98-I-1 U.S. Notes 1. The provisions in this subchapter (except subheadings 9801.00.70 and 9801.00.80) shall not apply to any article: (a) Exported with benefit of drawback; (b) Of a kind with respect to the importation of which an internal-revenue tax is imposed at the time such article is entered, unless such article was subject to an internal-revenue tax imposed upon production or importation at the time of its exportation from the United States and it shall be proved that such tax was paid before exportation and was not refunded; or (c) Manufactured or produced in the United States in a customs bonded warehouse or under heading 9813.00.05 and exported under any provision of law. 2. For the purposes of subheadings 9801.00.70 and 9801.00.80: (a) When because of the destruction of customs records or for other cause it is impracticable to establish whether drawback was allowed, or the amount allowed, on a returned article, there shall be assessed thereon an amount of duty equal to the estimated drawback and internal-revenue tax which would be allowable or refundable if the imported merchandise used in the manufacture or production of the returned article were dutiable or taxable at the rate applicable to such merchandise on the date of entry, but in no case more than the duty and tax that would apply if the article were wholly of foreign origin; (b) Tobacco products and cigarette papers and tubes classifiable under such subheading may be released from customs custody, without payment of that part of duty attributable to the internal-revenue tax, for return to internal-revenue bond as provided by section 5704(d) of the Internal Revenue Code of 1954; and (c) In order to facilitate the ascertainment and collection of the duty provided for, the Secretary of the Treasury is authorized to ascertain and specify the amounts of duty equal to drawback or internal-revenue tax which shall be applied to articles or classes or kinds of articles, and to exempt from the assessment of duty articles or classes or kinds of articles with respect to which the collection of such duty involves expense and inconvenience to the Government which is disproportionate to the probable amount of such duty. Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes XXII 98-I-2

    Section notes

    SECTION XXII SPECIAL CLASSIFICATION PROVISIONS;TEMPORARY LEGISLATION;TEMPORARY MODIFICATIONS ESTABLISHED PURSUANT TO TRADE LEGISLATION; ADDITIONAL IMPORT RESTRICTIONS ESTABLISHED PURSUANT TO SECTION 22 OF THE AGRICULTURAL ADJUSTMENT ACT, AS AMENDED XXII-1 Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes XXII-2 Harmonized Tariff Schedule of the United States Revision 29 (2025) Annotated for Statistical Reporting Purposes

    Latest update

    Last updated

    November 15, 2025

    Revised every January & July

    Let's get your shipment cleared

    Submit your details and our team will help with classification and compliance.